T97 www.vishay.com vishay sprague revision: 05-dec-11 1 document number: 40092 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 solid tantalum chip capacitors t antamount ? , hi-rel cots, ultra-low esr, conformal coated case features ? high reliability; weibul l failure rate grading available ? surge current testing per mil-prf-55365 options available ?ultra-low esr ? tin/lead (snpb) termination available ? mounting: surface mount ? compliant to rohs directive 2002/95/ec note * pb containing terminations are not rohs compliant, exemptions may apply performance characteristics www.vishay.com/doc?40088 operating temperature: - 55 c to + 85 c (to + 125 c with voltage derating) capacitance range: 10 f to 1500 f capacitance tolerance: 10 %, 20 % standard voltage rating: 4 v dc to 75 v dc notes (1) available on select ratings. see standard ra tings table. ? we reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. volt age substitutions will be marked wi th the higher voltage rating. note ? the anode termination (d less b) will be a mi nimum of 0.012" [0.3 mm] ordering information T97 r 227 k 020 e s a type case code capacitance capacitance tolerance dc voltage rating at + 85 c termination/ packaging (available options are series dependent) reliability level surge current see ratings and case code table this is expressed in pf. the first two digits are the significant figures. the third is the number of zeros to follow. k = 10 % m = 20 % this is expressed in volts. to complete the three-digit block, zeros precede the voltage rating. a decimal point is indicated by an r (6r3 = 6.3 v). e = sn/pb solder/ 7" (178 mm) reel l = sn/pb solder/ 7" (178 mm), 1/2 reel c = 100 % tin/ 7" (178 mm), reel h = 100 % tin/ 7" (178 mm), 1/2 reel a = 1.0 % weibull b = 0.1 % weibull (1) s = 40 h burn-in z = non- established reliability a = 10 cycles at + 25 c b = 10 cycles at - 55 c/ + 85 c s = 3 cycles at 25 c dimensions in inches [millimeters] case code l (max.) w h a b d (ref.) j (max.) v 0.299 [7.6] 0.173 0.016 [4.4 0.4] 0.079 [2.0 max.] 0.051 0.012 [1.3 0.3] 0.181 0.024 [4.6 0.6] 0.252 [6.4] 0.004 [0.1] d 0.299 [7.6] 0.173 0.016 [4.4 0.4] 0.138 [3.5 max.] 0.051 0.012 [1.3 0.3] 0.181 0.024 [4.6 0.6] 0.252 [6.4] 0.004 [0.1] e 0.299 [7.6] 0.173 0.016 [4.4 0.4] 0.157 0.016 [4.0 0.4] 0.051 0.012 [1.3 0.3] 0.181 0.024 [4.6 0.6] 0.252 [6.4] 0.004 [0.1] r 0.299 [7.6] 0.238 0.016 [6.0 0.4] 0.142 0.016 [3.6 0.4] 0.051 0.012 [1.3 0.3] 0.181 0.024 [4.6 0.6] 0.244 [6.2] 0.004 [0.1] f 0.299 [7.6] 0.238 0.016 [6.0 0.4] 0.185 0.016 [4.7 0.4] 0.055 0.016 [1.4 0.4] 0.181 0.024 [4.6 0.6] 0.244 [6.2] 0.004 [0.1] z 0.299 [7.6] 0.238 0.016 [6.0 0.4] 0.236 0.016 [6.0 0.4] 0.055 0.016 [1.4 0.4] 0.181 0.024 [4.6 0.6] 0.244 [6.2] 0.004 [0.1] m 0.315 [8] 0.260 + 0.016/- 0.024 [6.6 + 0.4/- 0.6] 0.142 0.016 [3.6 0.4] 0.051 0.012 [1.3 0.3] 0.197 0.024 [5.0 0.6] 0.260 [6.6] 0.004 [0.1] h 0.315 [8] 0.260 + 0.016/- 0.024 [6.6 + 0.4/- 0.6] 0.205 0.016 [5.2 0.4] 0.055 0.016 [1.4 0.4] 0.197 0.024 [5.0 0.6] 0.260 [6.6] 0.004 [0.1] n 0.315 [8.0] 0.259 + 0.016/- 0.024 [6.6 + 0.4/- 0.6] 0.252 0.016 [6.4 0.4] 0.056 0.017 [1.4 0.4] 0.196 0.025 [5.0 0.6] 0.259 [6.6] 0.004 [0.1] j h b a d l tantalum wire nib identifie s anode (+) terminal w
T97 www.vishay.com vishay sprague revision: 05-dec-11 2 document number: 40092 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) contact factory for availability ratings and case codes f 4 v 6.3 v 10 v 16 v 20 v 25 v 35 v 50 v 63 v 75 v 10 dr (1) 15 e/r r 22 rf 33 f 47 rz/n 68 rf 100 ff 150 f 220 e r m 330 v e f h/f 470 v e e h 680 e e r 1000 e/r r f 1500 r standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) max. esr at + 25 c 100 khz (m ? ) max. ripple 100 khz i rms (a) available reliability levels 4 v dc at + 85 c; 2.7 v dc at + 125 c 470 v T97v477(1)004(2)(4)(5) 19 8 60 2.2 a, b, s, z 680 e T97e687(1)004(2)(4)(5) 27 6 25 2.9 a, b, s, z 1000 e T97e108(1)004(2)(4)(5) 40 8 20 3.3 a, b, s, z 1000 r T97r108(1)004(2)(4)(5) 40 8 18 3.7 a, b, s, z 1500 r T97r158(1)004(2)(4)(5) 60 8 24 2.9 a, b, s, z 6.3 v dc at + 85 c; 4 v dc at + 125 c 330 v T97v337(1)6r3(2)(4)(5) 21 8 56 2.0 a, b, s, z 470 e T97e477(1)6r3(2)(4)(5) 30 6 30 2.7 a, b, s, z 680 e T97e687(1)6r3(2)(4)(5) 43 6 25 2.9 a, b, s, z 1000 r T97r108(1)6r3(2)(4)(5) 63 8 31 2.8 a, b, s, z 10 v dc at + 85 c; 7 wv dc at + 125 c 330 e T97e337(1)010(2)(4)(5) 33 6 35 2.5 a, b, s, z 470 e T97e477(1)010(2)(4)(5) 47 6 28 2.8 a, b, s, z 680 r T97r687(1)010(2)(6)(5) 68 6 28 3 s, z 1000 f T97f108(1)010(2)(3)(5) 100 20 120 1.4 a, s, z 16 wv dc at + 85 c; 10 v dc at + 125 c 220 e T97e227(1)016(2)(4)(5) 35 8 60 2.3 a, b, s, z 330 f T97f337(1)016(2)(4)(5) 53 10 100 1.6 a, b, s, z 470 h T97h477(1)016(2)(4)(5) 75 14 100 1.4 a, b, s, z 20 v dc at + 85 c; 13 v dc at + 125 c 220 r T97r227(1)020(2)(4)(5) 44 8 80 1.8 a, b, s, z 330 f T97f337(1)020(2)(6)(5) 66 10 100 1.6 s, z 330 h T97h337(1)020(2)(4)(5) 66 10 100 1.6 a, b, s, z 25 v dc at + 85 c; 17 v dc at + 125 c 68 r T97r686(1)025(2)(4)(5) 17 6 100 1.6 a, b, s, z 100 f T97f107(1)025(2)(4)(5) 25 8 100 1.6 a, b, s, z notes ? part number definitions: (1) capacitance to lerance: k, m (2) termination and packaging: c, e, h, l (3) reliability level: a, s, z (4) reliability level: a, b, s, z (5) surge current: a, b, s (6) reliability level: s, z (1) contact factory for availability
T97 www.vishay.com vishay sprague revision: 05-dec-11 3 document number: 40092 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 25 v dc at + 85 c; 17 v dc at + 125 c 150 f T97f157(1)025(2)(4)(5) 38 8 80 1.8 a, b, s, z 220 m T97m227(1)025(2)(3)(5) 55 8 100 1.6 a, s, z 35 v dc at + 85 c; 23 v dc at + 125 c 47 r T97r476(1)035(2)(4)(5) 17 6 100 1.6 a, b, s, z 68 f T97f686(1)035(2)(3)(5) 24 6 100 1.6 a, s, z 100 f T97f107m035(2)(3)(5) 35 8 100 1.6 a, s, z 50 v dc at + 85 c; 33 v dc at + 125 c 15 e T97e156(1)050(2)(4)(5) 8 6 300 0.9 a, b, s, z 15 r T97r156(1)050(2)(4)(5) 8 6 250 1 a, b, s, z 22 r T97r226(1)050(2)(4)(5) 11 6 220 1.1 a, b, s, z 33 f T97f336(1)050(2)(3)(5) 17 6 150 1.3 a, s, z 47 z T97z476(1)050(2)(6)(5) 24 6 240 1.1 s, z 47 n T97n476(1)050(2)(4)(5) 24 6 150 1.4 a, b, s, z 63 v dc at + 85 c; 42 v dc at + 125 c 10 d T97d106(1)063(2)(3)(5) 10 6 400 0.6 a, s, z 15 r T97r156(1)063(2)(6)(5) 10 6 400 0.8 s, z 22 f T97f226(1)063(2)(3)(5) 14 6 250 1.0 a, s, z 75 v dc at + 85 c; 50 v dc at + 125 c 10 r (1) T97r106(1)075(2)(6)(5) 8 6 500 0.7 s, z recommended voltage derating guidelines (for temperatures below + 85 c) standard conditions. for example: output filters capacitor voltage rating operating voltage 4.0 2.5 6.3 3.6 10 6.0 16 10 20 12 25 15 35 24 50 28 63 37.8 75 45 severe conditions. for example: input filters capacitor voltage rating operating voltage 4.0 2.5 6.3 3.3 10 5.0 16 8.0 20 10 25 12 35 15 50 24 63 32 75 37 standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) max. esr at + 25 c 100 khz (m ? ) max. ripple 100 khz i rms (a) available reliability levels notes ? part number definitions: (1) capacitance to lerance: k, m (2) termination and packaging: c, e, h, l (3) reliability level: a, s, z (4) reliability level: a, b, s, z (5) surge current: a, b, s (6) reliability level: s, z (1) contact factory for availability
T97 www.vishay.com vishay sprague revision: 05-dec-11 4 document number: 40092 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical curves 100 hz 1 khz 10 khz 100 khz 1 mhz 0.01 0.1 1 frequency esr and z ( ? ) 1500 f - 4 v r case size esr and z vs. frequency esr z 0.01 0.1 1 fre q uency e s r z 100 hz 1 khz 10 khz 100 khz 1 mhz e s r and z ( ) 330 f - 10 v e ca s e s ize e s r and z v s . fre q uency 100 hz 1 khz 10 khz 100 khz 1 mhz frequency esr z 0.01 0.1 1 10 esr and z ( ? ) 330 f - 6.3 v v case size and z vs. frequency 0.01 0.1 1 frequency esr z 100 hz 1 khz 10 khz 100 khz 1 mhz esr and z ( ? ) 1000 f - 6.3 v r case size esr and z vs. frequency 0.01 0.1 1 fre q uency 100 hz 1 khz 10 khz 100 khz 1 mhz 10 e s r z e s r and z ( ) 470 f - 4 v v ca s e s ize e s r and z v s . fre q uency
T97 www.vishay.com vishay sprague revision: 05-dec-11 5 document number: 40092 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 power dissipation case code maximum permissible power diss ipation at + 25 c (w) in free air v 0.141 d 0.215 e 0.240 r, f, m 0.250 z 0.265 h 0.265 n 0.280 standard packaging quantity case code units per reel 7" full reel 7" half reel v 1000 500 d 400 200 e 500 250 r 300 150 f 250 125 z 250 125 m 200 100 h 200 100 n 200 100 product information conformal coated guide www.vishay.com/doc?40150 pad dimensions packaging dimensions moisture sensitivity www.vishay.com/doc?40135 selector guides solid tantalum selector guide www.vishay.com/doc?49053 faq frequently asked questions www.vishay.com/doc?40110
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
